Featured with dual Push Pull coupled long stroke 12” drivers in sealed enclosure.
Combining digital switch mode power section of 400 watt RMS, with M&K proprietary analog “front-end” input stage, all designed for the legendary M&K Sound bass extension.
The M&K X12 subwoofer offer Ultra low distortion and the highest dynamic performance, as using “dual Push Pull coupled drivers” providing a total surface area most equivalent to a single 18” driver.
X12 is rewarded with “reference status” for music and movie production, and Home Theatre applications.
The all-new X Series woofers have been tailored specifically to fulfil M&K Sound’s ambitious performance requirements. They employ open baskets for free air circulation, resulting in minimal mechanical distortion by eliminating any captive compressed air mass behind the cone. Cast baskets also offer a very rigid connection to the cabinet and improved heat dissipation from the motor system for reduced power compression.
The M&K Sound X Series implements aluminium AC shorting rings in the magnet system and aluminium pole spacers above the pole piece. These devices make a significant contribution to the X Series subwoofers’ ability to render extraordinary fine dynamic bass detail with high precision at all levels as the drivers maintain full control and respond instantaneously to the incoming signal, for unparalleled accuracy and authority in the bottom octaves.
The X Series half-roll suspension is designed to deliver extended longstroke cone motion with no mechanical losses within the driver’s linear excursion range. The surround is also designed to provide a high degree of damping of pressure build-up inside the cabinet in order to avoid collapse modes in the surround in the presence of large input voltage
The non-inductive Titanium voice coil formers effectively eliminate mechanical damping in the moving coil. Titanium formers offer key advantages, including mechanical rigidity and extreme thermal stability. The long coil diameter of 2” ensures long, linear cone motion and extraordinary power handling.
| Amplifier Power: | 400 Watts RMS / 700 Watts Peak |
| Frequency Response: | 20 – 200 Hz +/- 2 dB |
| Total Harmonic Distortion: | 0.5%, 400 Watts, 4 Ohm |
| AC Power Consumption: | 0.5W standby, 60W average, 500W max. |
| AC Line Voltage: | 100-230 VAC 50/60 Hz 5A |
| LFE Input: | L/R Line level RCA & L/R XLR balanced |
| LFE Passthrough Output: | L/R Line level RCA & L/R XLR balanced |
| Switchable Lowpass Filters: | Fixed 80 Hz / Variable / No lowpass |
| Phase: | 0-180 degrees, continuously variable |
| Volume control: | Continuously variable / Fixed THX |
| Switchable LFE: | Optional THX or MK EQ mode |
| Dimensions HxWxD: | 25,8 x 17,3 x 17,8” / 656 x 440 x 453 mm |
| Weight: | 79.3 lbs / 36 kg |
| Finish: | Black satin |
