M&K Sound Dominus THX Atmos 7.2.4 Speaker Pack

S300 R/C & L THX ULTRA Front Right, Left & Centre Speakers

The S300 Series introduces specially designed separate tweeter and woofer mounting brackets for exceptional mechanical isolation from the cabinet and a tight connection between the die-cast, custom made brackets and the front baffle.

All drivers are rear mounted to the brackets and the brackets are rear-mounted to the baffle for an elegant front with no unsightly screws and no reflective edges near the drivers. This effectively eliminates a major source of colourations in more conventional, less conscientiously designed loudspeakers.

The S300 Series introduces a specially designed tweeter array mounting flange with integrated waveguide.

Rear-mounting the three tweeters to the rigid cast aluminium
flange provides exceptional mechanical isolation from the cabinet.

The solid steel woofer mounting bracket ensures a tightly sealed connection to the inside of the front baffle.

The S300 Series employs a complex, box-inside-a-box construction with a non-resonant layer of tar joining the two cabinets to provide constrained layer damping.

The S300 Series cabinet construction and specially designed drive units lower the mechanical noise floor drastically, bringing music and movies to life with effortless realism, building on a rock-solid foundation.

S300T THX ULTRA Tripole Surround Sound Rear Speakers

The S300 Series introduces specially designed separate tweeter and woofer mounting brackets for exceptional mechanical isolation from the cabinet and a tight connection between the die-cast, custom made brackets and the front baffle.

All drivers are rear mounted to the brackets and the brackets are rear-mounted to the baffle for an elegant front with no unsightly screws and no reflective edges near the drivers. This effectively eliminates a major source of colourations in more conventional, less conscientiously designed loudspeakers.

The S300 Series introduces a specially designed tweeter array mounting flange with integrated waveguide.

Rear-mounting the three tweeters to the rigid cast aluminium flange provides exceptional mechanical isolation from the cabinet.

The solid steel woofer mounting bracket ensures a tightly sealed connection to the inside of the front baffle.

The S300 Series employs a complex, box-inside-a-box construction with a non-resonant layer of tar joining the two cabinets to provide constrained layer damping.

The S300 Series cabinet construction and specially designed drive units lower the mechanical noise floor drastically, bringing music and movies to life with effortless realism, building on a rock-solid foundation.

IW150A In-wall/In-ceiling ATMOS Speakers

The M&K Sound In-Wall Loudspeaker
The M&K Sound Frameless Architectural In-Wall loudspeaker range consists of open baffle designs as well as sealed box versions of the brand’s popular satellite and on-wall models to provide wide flexibility in terms of applications and acoustic preferences. The series maintains the sonic integrity that has made M&K Sound a legend for over four decades.

Unlike other In-Wall makers, M&K Sound employs the exact same drivers and crossover technologies found in our acclaimed professional and consumer reference monitors to deliver consistent sound coverage throughout the room for superior imaging in stereo and surround, even when the speakers are fitted in the ceiling. M&K Sound drive units represent the culmination of decades of intensely focused transducer innovation.

Timbre Matching

The ambitious goal of the latest M&K Sound Architectural In-Wall range has been to counterbalance the inevitable acoustic consequences of reducing internal volume to 20 – 30% of a normal cabinet, while preserving the celebrated neutrality, realism and musicality that are the signature of M&K Sound. This level of tonal consistency and timbre matching offers unique flexibility and the opportunity to mix and match speakers from across the entire M&K Sound line-up.

The materials, acoustic properties, assembly and volume of every M&K Sound sealed box are all known factors during system design, so that the construction of the wall, the type of materials inside the wall and the volume of air behind the speaker all have no impact on final performance. It is this extreme level of control over the interaction of speaker and wall that makes it possible for M&K Sound to offer designer-friendly, invisible installation at no sacrifice in ultimate performance.

M&K Sound back boxes of 18mm MDF are painted with black structure polyurethane lacquer for moisture resistant sealed surfaces. The sealed box also provides effective protection against dust, insects and vermin. Damping pads on the rear panel eliminate vibration when in direct contact with the wall in shallow installations. All mounting hardware is pre-fitted to the box, including metal clamps to fix speaker wire in the pre-cut cable groove on the rear of the box. Goldplated push-on terminals with +/- polarity markings allow easy cable connection without the use of tools. Torx mounting screws with special washers are used for smooth mounting along with a practical, efficient, self-tightening dog ear clamp system for a perfect seal between baffle and wall.

Invisible, Immersive and In the Right Place

Ever more complex surround formats such as Dolby Atmos, DTS X and Auro create an increasing need for high performance, yet concealed loudspeakers to handle installations incorporating 9 – 11 channels and beyond with discretion and style.

To deliver full-bodied performance from shallow, sealed enclosures, M&K Sound begins with the identical drivers used in our original satellite models and extensively modifies the crossover design to compensate precisely for the reduced internal volume bringing In-Wall response much closer to the frequency response of the original loudspeakers. Further revisions take into account practical considerations such as service access and, most critically, ensure easy, fast, accurate and safe installation.

Simply mark the intended placement using the cut-out template enclosed with the speaker, prepare the opening, attach speaker wire, drop in the box, tighten screws and fit the front grille. Then, get ready to be blown away

Metal Grilles
M&K’s Architectural frameless, low profile, metal mesh front grilles are a subtly elegant, virtually invisible element in any living space. The grilles can be painted to match the surrounding surface. For vibration-free mounting, the M&K In-Wall grilles are fitted with multiple rubber-coated neodymium magnets with more than enough strength for safe in-ceiling use.

Hardened Steel Baffles
The specially modified M&K drive units are mounted in solid steel font baffles to reinforce the wall and eliminate the rattle and buzz of common plastic frame In-Wall speakers. The heat hardened steel is powder coated for effective rust-proofing to last a lifetime. IW950, IW150II, IW300 and IW28S incorporate folded baffle edges for enhanced stability in a hostile and unpredictable environment.

M&K Custom Designed Tweeters
Flush-mounted in the steel baffle to eliminate reflections, M&K Sound’s custom designed tweeters raise the bar for speed, accuracy, reliability, build quality and performance. Based on M&K Sound’s proprietary aerodynamic flow control damping system, our exclusive tweeters provide extended frequency response for an absolutely seamless transition to the bass/mid drive units.

The Choice of Professionals®
The world’s most eminent musicians, singers, producers, directors and engineers working in hundreds of film, music, broadcast and post-production studios worldwide, choose M&K Sound loudspeakers.
Every day they make hundreds of artistic decisions based upon what they hear on their speakers. The trust they have in M&K Sound allows them to work quickly and effectively as they create the most breathtaking film soundtracks and music ever recorded.

X15+ Subwoofer

New Carbon Fibre Woofer Cones have been developed for all models with ultra-high strength and rigidity to accommodate the added power and excursion of the new X⁺ Series. M&K Sound’s proprietary CNC-machined, extruded aluminium Distortion Killer Shorting Rings also guarantee absolute control and distortion-free, exemplary performance in all settings.

M&K Sound’s iconic Push-Pull subwoofer architecture and “reversed double driver” non-isobaric configuration mean that both drivers in the cabinet are ‘exposed’ to room air. Consequently, and like the X-Series before, the X⁺ Series models are effectively two subwoofers in one cabinet enabling a further associated reduction in distortion. This is made possible by having one inverted driver in relation to the other cancelling non-linearities to produce totally symmetric waveforms.

The X15⁺, X12⁺ and X10⁺ all feature full 25mm MDF construction and bracing for negligible panel vibrations or cabinet resonances, and increased venting at the base of the woofers mitigates distortion due to air turbulence. These milled cavities also act as convenient carrying handles for installation efficiency

M&K’s function and form co-exsist in harmony

Cosmetic makeovers for the X⁺ Series arrive in the form of recessed front baffles and convenient invisible magnetic grille attachment mechanisms. Harmonizing with the bold but Scandi-cool looks of the M&K S150 and S300 speakers, the new subwoofers offer cleaner lines and more discreet curved edges to complement living spaces or dedicated home cinema rooms

S300 R/C & L THX ULTRA Front Right, Left & Centre Speakers:

S300T THX ULTRA Tripole Surround Sound Rear Speakers:

IW150A In-wall/In-ceiling ATMOS Speakers:

X15+ Subwoofer: