M&K S150 THX Ultra 7.1.2 Speaker Pack

  • M&K S-150 THX ULTRA 5 Driver Studio Monitor (3 Units)
  • M&K S-150T Tripole Surround Studio Monitor (2 Pairs / 4 Units)
  • M&K IW-85 2 Way 5 ¼” In-Ceiling Speakers (Pair)
  • M&K X10 Dual 10” Push Pull 350 watt RMS Sealed Subwoofer

$18,450

CONTACT US

System Includes:

  • M&K S-150 THX ULTRA 5 Driver Studio Monitor (3 Units)
  • M&K S-150T Tripole Surround Studio Monitor (2 Pairs / 4 Units)
  • M&K IW-85 2 Way 5 ¼” In-Ceiling Speakers (Pair)
  • M&K X10 Dual 10” Push Pull 350 watt RMS Sealed Subwoofer

S-150 Studio Monitor

The legendary S150 is the culmination of more than 40 years of loudspeaker design and acoustic solution for any critical audio and video recordings.

What this updated version of the legendary studio monitor does in the conveyance of exactly what is there in the recorded source, no more and no less, is difficult to formulate in just a few words.

Essentially, it does pretty much nothing, except open up a wide, clean, clear window on every aspect of recorded sound, allowing you to shift your personal focus as you choose between specific details, instruments or voices, while never losing sight of the totality of the overall musical experience.

S-150T Tripole Surround Studio Monitor

Side- or rear-mounted speakers in a multi-channel audio system pose a radically different set of performance challenges relative to conventional stereo systems, because surround speakers are typically positioned much closer to the listener and deliver sound to the ears from very different angles.

The proprietary M&K Sound Tripole® configuration, essentially two speakers mounted in a single cabinet, is the first and only technology to effectively address these major issues to deliver both image specificity and an enveloping surround field, without compromise.

The M&K Sound S150T Tripole® THX combines both front and side mounted drivers to direct the surround image both indirectly and directly into the listening area.

IW-85 In-Ceiling Speaker

Experience full-range, designer-friendly sound to rival many “audiophile” stand-alone speakers, in a compact package that integrates beautifully into walls or ceilings!

The versatile IW85 is superb in two-channel or surround applications and can be combined with any M&K Sound speakers for a seamless sonic timber match.

X10 Subwoofer

Featured with dual Push Pull coupled long stroke 10” drivers in sealed enclosure.

Combining digital switch mode power section of 350 watt RMS, with M&K proprietary analog “front-end” input stage, all designed for the legendary M&K Sound bass extension.

The M&K X10 subwoofer offers very low distortion and high dynamic performance, as using “dual Push Pull coupled drivers” providing a total surface area most equivalent to a single 15” driver.

X10 is multiple rewarded for high quality performance in music and movie production, and Home Theatre applications.

S-150 Studio Monitor

Built on the S300

  • Created using the technologies, innovations and learnings from the newly redesigned S300.
  • Selected components derived from 300 series.

New Danish-designed high-performance tweeters

  • 28 mm vented voice coils provide high power handling and extended linearity
  • 28 mm high-precision coated soft dome.
  • One-piece heavy duty cast aluminium Triple Tweeter Array plate.
  • Specially constructed resonance-damped tweeter magnet-system for precise transient control.
  • Integrated waveguide combined with short horn load for wide dispersion and smooth frequency response

New 5.25-inch woofers

  • Aluminium distortion-killer rings for reduced distortion at high SPL levels
  • New extra-stiff coated fiberglass cone with special M&K profile geometry.
  • Vented pole piece in magnet system for low compression performance.
  • Vented voice coil for low compression.

New optimized crossovers

  • Phase-focused crossover designs optimized for low crossover points and transient control
  • New proprietary M&K Sound interconnect cables.

S-150T Tripole Surround Studio Monitor

Built on the S300

  • Created using the technologies, innovations and learnings from the newly redesigned S300.
  • Selected components derived from 300 series.

New Danish-designed high-performance tweeters

  • 28 mm vented voice coils provide high power handling and extended linearity
  • 28 mm high-precision coated soft dome.
  • One-piece heavy duty cast aluminium Triple Tweeter Array plate.
  • Specially constructed resonance-damped tweeter magnet-system for precise transient control.
  • Integrated waveguide combined with short horn load for wide dispersion and smooth frequency response

New 5.25-inch woofers

  • Aluminium distortion-killer rings for reduced distortion at high SPL levels
  • New extra-stiff coated fiberglass cone with special M&K profile geometry.
  • Vented pole piece in magnet system for low compression performance.
  • Vented voice coil for low compression.

New optimized crossovers

  • Phase-focused crossover designs optimized for low crossover points and transient control
  • New proprietary M&K Sound interconnect cables.

IW-85 In-Ceiling Speaker

The M&K Sound Frameless Architectural In-Wall loudspeaker range consists of open baffle designs as well as sealed box versions of the brand’s popular satellite and on-wall models to provide wide flexibility in terms of applications and acoustic preferences. The series maintains the sonic integrity that has made M&K Sound a legend for over four decades.

Unlike other In-Wall makers, M&K Sound employs the exact same drivers and crossover technologies found in M&K’s acclaimed professional and consumer reference monitors to deliver consistent sound coverage throughout the room for superior imaging in stereo and surround, even when the speakers are ftted in the ceiling.

M&K Sound drive units represent the culmination of decades of intensely focused transducer innovation.

The ambitious goal of the latest M&K Sound Architectural In-Wall range has been to counterbalance the inevitable acoustic consequences of reducing internal volume to 20 – 30% of a normal cabinet, while preserving the celebrated neutrality, realism and musicality that are the signature of M&K Sound.

This level of tonal consistency and timbre matching offers unique flexibility and the opportunity to mix and match speakers from across the entire M&K Sound line-up.

X10 Subwoofer

The all-new X Series woofers have been tailored specifically to fulfil M&K Sound’s ambitious performance requirements. They employ open baskets for free air circulation, resulting in minimal mechanical distortion by eliminating any captive compressed air mass behind the cone. Cast baskets also offer a very rigid connection to the cabinet and improved heat dissipation from the motor system for reduced power compression.

The M&K Sound X Series implements aluminium AC shorting rings in the magnet system and aluminium pole spacers above the pole piece. These devices make a significant contribution to the X Series subwoofers’ ability to render extraordinary fine dynamic bass detail with high precision at all levels as the drivers maintain full control and respond instantaneously to the incoming signal, for unparalleled accuracy and authority in the bottom octaves.

The X Series half-roll suspension is designed to deliver extended longstroke cone motion with no mechanical losses within the driver’s linear excursion range. The surround is also designed to provide a high degree of damping of pressure build-up inside the cabinet in order to avoid collapse modes in the surround in the presence of large input voltage

The non-inductive Titanium voice coil formers effectively eliminate mechanical damping in the moving coil. Titanium formers offer key advantages, including mechanical rigidity and extreme thermal stability. The long coil diameter of 2” ensures long, linear cone motion and extraordinary power handling.

S-150 Studio Monitor

Impedance4 ohm
Recommended Amplifier Power:25-500W
Bass/Midrange:2 x 5,25” Fiberglass
High Frequency Driver:3 x 1.1” Soft Fabric Dome
Frequency Response:75 Hz – 20KHz +/- 3dB
Sensitivity:92 dB, 2.83V1m
Dimensions HxWxD:31,8 x 26,6 x 30,8 cm / 12,5 x 10,4 x 12,2”
Weight:11.5 kg / 25.4 lbs
Finish:Black satin

S-150T Tripole Surround Studio Monitor

Impedance4 ohm
Recommended Amplifier Power:5-200W
Bass/Midrange:1 x 5,25” Fiberglass
High Frequency Driver:1.1” Soft Fabric Dome
Side drivers:2 x 3.5” Paper Pulp
Frequency Response:80 Hz – 20KHz +/- 3dB
Sensitivity:86 dB, 2.83V1m
Back HxWxD:27 x 26.5 x 15 cm / 10.6 x 10.4 x 5.9”
Front HxWxD:27 x 16.5 x 15 cm / 10.6 x 6.4 x 5.9”
Weight:4.8 kg / 10,6 lbs
Finish:Black Satin / White satin

IW-85 In-Ceiling Speaker

Impedance4 ohm
Recommended Amplifier Power:25-200W
Bass/Midrange:5.25” Polypropylene
High Frequency Driver:1” Soft fabric dome
Frequency Response:85 Hz – 20 kHz, ±3dB
Sensitivity:88 dB, 2.83V/1m
Grille Dimensions (HxW):10.62 x 6.88”, 270 x 175 mm
Baffle Dimensions (HxW):10.39 x 6.65”, 264 x 169 mm
Wall Cutout (HxW):9.4” x 6”, 239 x 152 mm
Mounting Depth:3.67”, 93 mm
Weight:9.0 lbs / 4.1 kg
Grill Finish:White metal, paintable

X10 Subwoofer

Amplifier Power:350 Watts RMS / 650 Watts Peak
Frequency Response:20 – 200 Hz +/- 2 dB
Total Harmonic Distortion:0.5%, 350 Watts, 4 Ohm
AC Power Consumption:0.5W standby, 55W average, 450W max.
AC Line Voltage:100-230 VAC 50/60 Hz 5A
LFE Input:L/R Line level RCA & L/R XLR balanced
LFE Passthrough Output:L/R Line level RCA & L/R XLR balanced
Switchable Lowpass Filters:Fixed 80 Hz / Variable / No lowpass
Phase:0-180 degrees, continuously variable
Volume control:Continuously variable / Fixed THX
Switchable LFE:Optional THX or MK EQ mode
Dimensions HxWxD:22 x 14,7 x 17,3” / 560 x 374 x 439 mm
Weight:61.7 lbs / 28 kg
Finish:Black satin

Title

Go to Top